16 port Managed Ethernet Industrial Fiber Switch
Model Name
STI-4160DGGM(L2+)
Key Features
- 16*10/100/1000Base-T RJ45, 4*1000/2500Base-X SFP slots
- Redundant power 12-75V input with polarity reverse/over-voltage/over-current protection
- Support USB one key configuration and upgrading
- DI/DO/RS485 are optional
- Layer 3 features: Support IPv4/IPv6 static routing, DHCP server
- Layer 2 features: VLAN; ERPS, STP/RSTP/MSTP; Link aggregation, IGMP snooping, port mirroring QinQ, 802.1X, port isolation, RMON, NTP client, DHCP snooping/client, Ping/Tracert test, ACL, QoS and SFP DDM function
- Management and maintenance: IPv4 and IPv6 management; Support Web, SNMP, CLI, Telnet/SSH management method; Support user management, system log, configuration upload/download through web interface, firmware upgrade via HTTP/TFTP/USB
- Support G.8032 ERPS protocol, recovery time ≤20ms
- Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
- IP40 fan-less and Din-rail hardware design
- Operation temperature: -40 ℃ ~+75℃
With above features, it is an ideal solution for IP Surveillance, wind, electricity, assembly automation, subway PIS, power SCADA, sewage treatment, metallurgy, intelligent transportation, rail transportation, military and other industries.
Specification
Product Name |
20 port Hybrid Rate Layer 2+ Managed Industrial Ethernet Switch |
Port |
16*10/100/1000Base-T RJ45 4*1G/2.5GBase-X SFP 1*RJ45 Console port(115200,8,N,1) 1*USB 2.0 for configuration and firmware update |
Data&Alarm Port (Optional) |
1 channel RS485 1 channel DI(digital input) 1 channel DO(digital output) |
Network Medium |
10BASE-T: Cat 3, 4, 5 or above UTP(≤100 meter) 100BASE-TX: Cat 5 or above UTP (≤100 meter) 1000BASE-TX: Cat5 or above UTP (≤100 meter) |
Network protocol |
IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP |
Fiber Option |
SFP Plugable Module(LC) SM: 1310nm/1550nm, 20Km; 1490nm/1550nm, 40~100Km MM: 1310nm, 2Km; 850nm, 500-meter |
Switching Capacity |
52Gbps |
Throughput |
77.3Mpps |
Packet Buffer |
12M |
MAC Address |
16K |
VLAN |
4K |
Jumbo Frame |
10Kbytes |
Transfer Mode |
Store and forward, forwarding delay<5us |
MDX/MIDX |
Support |
Watchdog |
Support |
MTBF |
200,000 hours |
Power Voltage |
Input Voltage: DC 12-75V Redundant power input Removable 2*2-pin terminal block |
Input current |
2A DC/DC input Max |
Total power consumption |
Full loading ≤22W |
Reverse polarity protection |
Support |
Over-voltage protection |
Support |
Over-current protection |
Support |
Industry Standard |
EMI: FCC Part 15B Class A RS: IEC 61000-4-3 80 MHz-1 GHz: 10 V/m EFT: IEC 61000-4-4 power interface: 4K;Ethernet ports: 2K ESD: IEC 61000-4-2 Level 4(8K/15K) Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 |
Protection Level |
IP40 |
Installation Method |
Din Mounted |
Security Certificate |
CE/FCC/RoHS |
Working Environment |
Working Temperature: -40℃~75℃ Storage Temperature: -40℃~85℃ Relative Humidity: 5%~95%, non-condensing |
LED Indicators |
PWR(Power indicator), Green Color On: power status is normal
S(System indicator), Red Color On: Normal operation Off: Connection failure Blinking: Device initialization
USB(USB status indicator), Green Color On: USB flash drive is detected by device Blinking: the device is reading and writing the data from USB flash drive Off: USB flash drive is not inserted or not detected by device
ALM(Fault status indicator), Red Color On: Fault alarm Off: Device on normal working state
Ring(Ring network indicator) On: Ring network enable Off: Ring network disable
Ethernet Port 1. Green Indicator On: port link up Off: port link down Blinking: data is in normal transmission
2. Yellow Indicator On: port speed is 1000M Off: port speed is 10/100M
Fiber port, Green Color On: port link up Off: port link down Blinking: data is in normal transmission |
L3 Function
ARP |
ARP table aging |
DHCP server |
|
IPv4/IPv6 |
Static routing |
L2 Function
Port aggregation |
Support GE port aggregation Support 2.5GE aggregation Support static aggregation Support LACP dynamic aggregation Up to 64 aggregation groups and up to 8 ports per group |
Port features |
Support IEEE802.3x flow control, Support interface counters, Support port isolation, Port mirroring ( One-to-One, Many-to-One) Support loop detection(Port-based; VLAN-based) Support broadcast storm suppression(broadcast; unknown multicast; unknown unicast) |
Mac-address table management |
Support static Mac-address management Support dynamic Mac-address Management Support filtering Mac-address Support MAC limit based on port and VLAN Support MAC flapping based on port and VLAN |
VLAN |
Support access mode Support trunk mode Support hybrid mode |
VLAN classification |
Mac Based VLAN IP Based VLAN Protocol Based VLAN |
GVRP |
Normal mode Fixed mode Forbidden mode |
QinQ |
Port-based QinQ VLAN-based QinQ(VLAN-stacking; VLAN-mapping) Flow-based QinQ |
LLDP |
LLDP (Link Layer Discovery Protocol) |
Ring network protocol |
Support IEEE802.1D-STP Support IEEE802.1W-RSTP Support IEEE802.1S-MSTP Support G.8032 ERPS protocol, single ring, sub Ring and major ring Recovery time ≤20ms |
L2 Multicast |
|
IGMP snooping |
Support IGMP snooping |
Group address |
Support group address |
Security Function |
|
ACL |
IP Standard ACL MAC extend ACL IP extend ACL IPv6 ACL |
QoS |
Support QoS Class, remarking Support SP, WRR queue scheduling Ingress port-based rate-limit Egress port-based rate-limit Support policy-based QoS |
802.1x |
Port access control Mac-address access control RADIUS server |
Port-security |
Port-security |
IP source guard |
IP Port/MAC binding |
ARP-check |
Support ARP-check and ARP packet filtering for illegal users |
Access control |
Support Telnet/SSH/HTTP/HTTPS user access control |
Management&Maintenance Function |
|
User Management |
Support password protection Support user authorization management |
SNMP |
Supporting SNMP V1/V2C/V3 version |
Web Management |
Web Management Support HTTP V1.1 Support HTTPS |
CLI management |
Console/Telnet command line management |
RMON |
Support RMON(Remote Monitoring) alarm |
Firmware upgrade |
Firmware upgrade |
Fault Detection |
Ping/Tracerout Dying gasp Support optical transceiver DDM function |
Cable detection |
Support copper port cable detection |
NTP |
Network Time Protocol |
Syslog/Debug |
Syslog/Debug Syslog send to two servers |
Configuration import/export |
Support FTP/TFTP remote import/export Support USB import/export |
Dual partition management |
Support dual partition switching |
Application Protocol Function |
|
DHCP Snooping |
DHCP snooping trust port Support remote-id/circuit-id configuration DHCP option-82 |
DHCP client |
Support DHCP client |
Telnet server |
Support telnet server |
Telnet client |
Support telnet client |
SSH server |
Support SSH server |
TACACS |
Support TACACS(the terminal access controller accesses the control system) |
Sflow |
Support network traffic analysis |
TFTP |
Support TFTP Client |
Mechanical Drawing
Packing List
- 1pc switch
- 1pc user manual
- 1pc console cable
Shipping box information(Below information is approximately accurate)
Product size: 158*115*110mm
Inner box size: 230*180*142mm
Product weight: 1.7Kg
Packing weight: 2Kg
Master box size: 475*465*380mm
Packing quantity: 12Pcs
Packing weight: 25Kg