4光24导轨-withoutserialport
4光24导轨-withserialport

24 Port 10G Rugged Ethernet Managed Fiber Optic Switch

Model Name

 

STI-4240XGGM(L2+)

 

Key Features

 

  • 24*10/100/1000Base-T RJ45 ports, 4*1G/2.5G/10G Base-X SFP+ slots
  • Redundant power 12-75V input with polarity reverse/over-voltage/over-current protection
  • Support USB one key configuration & upgrading
  • DI/DO/RS485 are optional
  • Layer 3 features: Support IPv4/IPv6 static routing, DHCP server
  • Layer 2 features: VLAN; ERPS, STP/RSTP/MSTP; Link aggregation, IGMP snooping, port mirroring QinQ, 802.1X, port isolation, RMON, NTP client, DHCP snooping/client, Ping/Tracert test, ACL, QoS and SFP DDM function
  • Management and maintenance: IPv4 and IPv6 management; Support Web, SNMP, CLI, Telnet/SSH management method; Support user management, system log, configuration upload/download through web interface, firmware upgrade via HTTP/TFTP/USB
  • Support G.8032 ERPS protocol, recovery time ≤20ms
  • Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
  • IP40 fan-less and Din-rail hardware design
  • Operation temperature: -40 ℃ ~+75℃ 

 

With above features, it is an ideal solution for IP Surveillance, wind, electricity, assembly automation, subway PIS, power SCADA, sewage treatment, metallurgy, intelligent transportation, rail transportation, military and other industries.

 

Specification

 

Product Name

28 port Hybrid Rate Layer 2+ Managed Industrial Ethernet Switch

Port

24*10/100/1000Base-T RJ45

4*1G/2.5G/10GBase-X SFP+

1*RJ45 Console port(115200,8,N,1)

1*USB 2.0 for configuration and firmware update

Data&Alarm Port

(Optional)

1 channel RS485

1 channel DI(digital input)

1 channel DO(digital output)

Network Medium

10BASE-T: Cat 3, 4, 5 or above UTP(≤100 meter)

100BASE-TX: Cat 5 or above UTP (≤100 meter)

1000BASE-TX: Cat5 or above UTP (≤100 meter)

Network protocol

IEEE 802.3 10Base-T Ethernet

IEEE 802.3u 100Base-TX Ethernet

IEEE 802.3ab 1000Base-T Ethernet

IEEE 802.3z 1000Base-X Ethernet

IEEE802.3x Flow Control and Back Pressure

IEEE 802.1D Spanning Tree Protocol

IEEE 802.1w Rapid Spanning Tree Protocol

IEEE 802.1Q VLAN

ITU-T G.8032 ERPS

IEEE 802.1X Port Authentication Network Control

IEEE 802.1ab LLDP

IEEE 802.3ad LACP

Fiber Option

SFP Plugable Module(LC)

SM: 1310nm/1550nm, 20Km; 1490nm/1550nm, 40~100Km

MM: 1310nm, 2Km; 850nm, 500-meter

Switching Capacity

128Gbps

Throughput

190Mpps

Packet Buffer

12M

MAC Address

16K

VLAN

4K

Jumbo Frame

10Kbytes

Transfer Mode

Store and forward, forwarding delay<5us

MDX/MIDX

Support

Watchdog

Support

MTBF

200,000 hours

Power Voltage

Input Voltage: DC 12-75V

Redundant power input

Removable 2*2-pin terminal block

Input current

2.5A DC/DC input Max

Total power consumption

Full loading ≤30W

Reverse polarity protection

Support

Over-voltage protection

Support

Over-current protection

Support

Industry Standard

EMI: FCC Part 15B Class A
Surge protection of power: IEC 61000-4-5  6KV/4KV(8/20us)
Surge protection of Ethernet ports: IEC 61000-4-5  6KV/2KV(10/700us)

RS: IEC 61000-4-3 80 MHz-1 GHz: 10 V/m

EFT: IEC 61000-4-4  power interface: 4K;Ethernet ports: 2K
CS: IEC 61000-4-6 10V

ESD: IEC 61000-4-2  Level 4(8K/15K)
Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

Protection Level

IP40

Installation Method

Din Mounted

Security Certificate

CE/FCC/RoHS

Working Environment

Working Temperature: -40℃~75℃

Storage Temperature: -40℃~85℃

Relative Humidity: 5%~95%, non-condensing

LED Indicators

PWR(Power indicator), Green Color

On: power status is normal
Off: power off or power connection failure

 

S(System indicator), Red Color

On: Normal operation

Off: Connection failure

Blinking: Device initialization

 

USB(USB status indicator), Green Color

On: USB flash drive is detected by device

Blinking: the device is reading and writing the data from USB flash drive

Off: USB flash drive is not inserted or not detected by device

 

ALM(Fault status indicator), Red Color

On: Fault alarm

Off: Device on normal working state

 

Ring(Ring network indicator)

On: Ring network enable

Off: Ring network disable

 

Ethernet Port

1. Green Indicator

On: port link up

Off: port link down

Blinking: data is in normal transmission

 

2. Yellow Indicator

On: port speed is 1000M

Off: port speed is 10/100M

 

Fiber port, Green Color

On: port link up

Off: port link down

Blinking: data is in normal transmission

 

L3 Function

 

ARP

ARP table aging

DHCP server

IPv4/IPv6

Static routing

 

L2 Function

 

Port aggregation

Support GE port aggregation

Support 2.5GE aggregation

Support 10GE aggregation

Support static aggregation

Support LACP dynamic aggregation

Up to 64 aggregation groups and up to 8 ports per group

Port features

Support IEEE802.3x flow control,

Support interface counters,

Support port isolation,

Port mirroring (One-to-One, Many-to-One)

Support loop detection(Port-based; VLAN-based)

Support broadcast storm suppression(broadcast; unknown multicast; unknown unicast)

Mac-address

table management

Support static Mac-address management

Support dynamic Mac-address Management

Support filtering Mac-address

Support MAC limit based on port and VLAN

Support MAC flapping based on port and VLAN

VLAN

Support access mode

Support trunk mode

Support hybrid mode

VLAN classification

Mac Based VLAN

IP Based VLAN

Protocol Based VLAN

GVRP

Normal mode

Fixed mode

Forbidden mode

QinQ

Port-based QinQ

VLAN-based QinQ(VLAN-stacking; VLAN-mapping)

Flow-based QinQ

LLDP

LLDP (Link Layer Discovery Protocol)

Ring network protocol

Support IEEE802.1D-STP

Support IEEE802.1W-RSTP

Support IEEE802.1S-MSTP

Support G.8032 ERPS protocol, single ring, sub Ring and major ring

Recovery time ≤20ms

L2 Multicast

IGMP snooping

Support IGMP snooping

Group address

Support group address

Security Function

ACL

IP Standard ACL

MAC extend ACL

IP extend ACL

IPv6 ACL

QoS

Support QoS Class, remarking

Support SP, WRR queue scheduling

Ingress port-based rate-limit

Egress port-based rate-limit

Support policy-based QoS

802.1x

Port access control

Mac-address access control

RADIUS server

Port-security

Port-security

IP source guard

IP Port/MAC binding

ARP-check

Support ARP-check and ARP packet filtering for illegal users

Access control

Support Telnet/SSH/HTTP/HTTPS user access control

Management&Maintenance Function

User Management

Support password protection

Support user authorization management

SNMP

Supporting SNMP V1/V2C/V3 version

Web Management

Web Management

Support HTTP V1.1

Support HTTPS

CLI management

Console/Telnet command line management

RMON

Support RMON(Remote Monitoring) alarm

Firmware upgrade

Firmware upgrade

Fault Detection

Ping/Tracerout

Dying gasp

Support optical transceiver DDM function

Cable detection

Support copper port cable detection

NTP

Network Time Protocol

Syslog/Debug

Syslog/Debug

Syslog send to two servers

Configuration import/export

Support FTP/TFTP remote import/export

Support USB import/export 

Dual partition management

Support dual partition switching

Application Protocol Function

DHCP Snooping

DHCP snooping trust port

Support remote-id/circuit-id configuration

DHCP option-82

DHCP client

Support DHCP client

Telnet server

Support telnet server

Telnet client

Support telnet client

SSH server

Support SSH server

TACACS

Support TACACS(the terminal access controller accesses the control system)

Sflow

Support network traffic analysis

TFTP

Support TFTP Client

 

Mechanical Drawing

 

 

 

Packing List

 

  • 1pc switch
  • 1pc user manual
  • 1pc console cable

 

Shipping box information(Below information is approximately accurate)

 

Product size: 158*115*110mm

Inner box size: 230*180*142mm

Product weight: 1.7Kg

Packing weight: 2Kg

 

Master box size: 475*465*380mm

Packing quantity: 12Pcs

Packing weight: 25Kg