withoutserial
withserial

20 Port Rugged Managed Ethernet 10G PoE Switch

Model Name

 

STI-488XGGPM(L3)

 

Key Features

 

  • 8*10/100/1000Base-T RJ45 PoE, 4*1G/2.5G/10GBase-X SFP+ slots
  • Redundant power 44-57V input with polarity reverse/over-voltage/over-current protection
  • Support one digital output for relay alarm (terminal block Pin 5/6)
  • Comply with IEEE802.3af PoE and IEEE802.3at PoE+ standard
  • Layer 3 features: Supports static and dynamic routing, RIP, OSPF, BGP4, ECMP, VRRP
  • Layer 2 features: VLAN/VLAN Classification/QinQ/STP, RSTP, MSTP/Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP DDM/IPV6 management/PoE management/Web/SNMP/Telnet/TFTP/Web upgrading
  • Support G.8032 ERPS protocol, recovery time ≤20ms
  • Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
  • IP40 fan-less and Din-rail hardware design
  • Operation temperature: -40 ℃ ~+75℃ 

 

With above features, it is an ideal solution for IP Surveillance, wind, electricity, assembly automation, subway PIS, power SCADA, sewage treatment, metallurgy, intelligent transportation, rail transportation, military and other industries.

 

Specification

 

Product Name

12 port Hybrid Rate Layer 3 Managed Industrial Ethernet PoE Switch

Port

8*10/100/1000Base-T RJ45 PoE

4*1G/2.5G/10GBase-X SFP+

1*RJ45 Console port(115200,8,N,1)

Alarm port

One relay output for power failure

Alarm relay current carry ability: 1A@24VDC

Network Medium

10BASE-T: Cat 3, 4, 5 or above UTP(≤100 meter)

100BASE-TX: Cat 5 or above UTP (≤100 meter)

1000BASE-TX: Cat5 or above UTP (≤100 meter)

Network protocol

IEEE 802.3 10Base-T Ethernet

IEEE 802.3u 100Base-TX Ethernet

IEEE 802.3ab 1000Base-T Ethernet

IEEE 802.3z 1000Base-X Ethernet

IEEE802.3x Flow Control and Back Pressure

IEEE 802.1D Spanning Tree Protocol

IEEE 802.1w Rapid Spanning Tree Protocol

IEEE 802.1Q VLAN

ITU-T G.8032 ERPS

IEEE 802.1X Port Authentication Network Control

IEEE 802.1ab LLDP

IEEE 802.3ad LACP

IEEE802.3af PoE

IEEE802.3at PoE+

Fiber Option

SFP Plugable Module(LC)

SM: 1310nm/1550nm, 20Km; 1490nm/1550nm, 40~100Km

MM: 1310nm, 2Km; 850nm, 500-meter

Switching Capacity

96Gbps

Throughput

142.8Mpps

Packet Buffer

12M

MAC Address

16K

VLAN

4K

Jumbo Frame

10Kbytes

Transfer Mode

Store and forward, forwarding delay<5us

MDX/MIDX

Support

Watchdog

Support

MTBF

200,000 hours

PoE Protocol

IEEE802.3af(15.4W), IEEE802.3at(30W)

PoE Wiring

1/2(+), 3/6(-)

PoE Budget

240W

Power Voltage

Input Voltage: DC 44-57V(PoE af), DC 52-57V(PoE at)

Redundant power input

Removable 6 PIN Industrial Terminal Block, pin 5/6 for relay alarm output

Input current

5.8A Max

Total power consumption

Full loading without PoE ≤18W

Reverse polarity protection

Support

Over-voltage protection

Support

Over-current protection

Support

Industry Standard

EMI: FCC Part 15B Class A
Surge protection of power: IEC 61000-4-5  6KV/4KV(8/20us)
Surge protection of Ethernet ports: IEC 61000-4-5  6KV/2KV(10/700us)

RS: IEC 61000-4-3 80 MHz-1 GHz: 10 V/m

EFT: IEC 61000-4-4  power interface: 4K;Ethernet ports: 2K
CS: IEC 61000-4-6 10V

ESD: IEC 61000-4-2  Level 4(8K/15K)
Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

Protection Level

IP40

Installation Method

Din Mounted

Security Certificate

CE/FCC/RoHS

Working Environment

Working Temperature: -40℃~75℃

Storage Temperature: -40℃~85℃

Relative Humidity: 5%~95%, non-condensing

LED Indicators

PWR(Power indicator), Green Color

On: power status is normal
Off: power off or power connection failure

 

S(System indicator), Red Color

On: Normal operation

Off: Connection failure

Blinking: Device initialization

 

Ethernet Port

1. Green Indicator

On: port link up

Off: port link down

Blinking: data is in normal transmission

 

2. Yellow Indicator

PoE ports

On: PoE working

Off: PoE not working

 

Fiber port, Green Color

On: port link up

Off: port link down

Blinking: data is in normal transmission

 

L3 Function

 

ARP

ARP table aging

DHCP server

IPv4/IPv6

Static routing

ECMP

Support ECMP (Equal-cost multi-path routing)

Support the configuration of ECMP Max next-hop

Support capacity balanced configuration

Route policy 

IPv4 prefix-list

VRRP

Virtual Router Redundancy Protocol

Routing Protocol Specification

RIP

RIPv1/v2

OSPFv2

OSPFv2

BGP4

BGP4

BGP Support Routing Recursive ECMP

Support to view the number of neighbors and up/down state

IS-IS

IS-ISv4

Routing entry

13K

 

L2 Function

 

Port aggregation

Support GE port aggregation

Support 2.5GE aggregation

Support 10GE aggregation

Support static aggregation

Support LACP dynamic aggregation

Up to 64 aggregation groups and up to 8 ports per group

Port features

Support IEEE802.3x flow control

Support interface counters

Support port isolation

Port mirroring (One-to-One, Many-to-One)

Support loop detection(Port-based; VLAN-based)

Support broadcast storm suppression(broadcast; unknown multicast; unknown unicast)

Mac-address table management

Support static Mac-address management

Support dynamic Mac-address Management

Support filtering Mac-address

Support MAC limit based on port and VLAN

Support MAC flapping based on port and VLAN

VLAN

Support access mode

Support trunk mode

Support hybrid mode

VLAN classification

Mac Based VLAN

IP Based VLAN

Protocol Based VLAN

GVRP

Normal mode

Fixed mode

Forbidden mode

QinQ

Port-based QinQ

VLAN-based QinQ (VLAN-stacking; VLAN-mapping)

Flow-based QinQ

LLDP

LLDP (Link Layer Discovery Protocol)

Ring network protocol

Support IEEE802.1D-STP

Support IEEE802.1W-RSTP

Support IEEE802.1S-MSTP

Support G.8032 ERPS protocol, single ring, sub Ring and major ring

Recovery time ≤20ms

L2 Multicast

IGMP snooping

Support IGMP snooping

Group address

Support group address

Security Function

ACL

IP Standard ACL

MAC extend ACL

IP extend ACL

IPv6 ACL

QoS

Support QoS Class, remarking

Support SP, WRR queue scheduling

Ingress port-based rate-limit

Egress port-based rate-limit

Support policy-based QoS

802.1x

Port access control

Mac-address access control

RADIUS server

Port-security

Port-security

IP source guard

IP Port/MAC binding

ARP-check

Support ARP-check and ARP packet filtering for illegal users

Access control

Support Telnet/SSH/HTTP/HTTPS user access control

Management&Maintenance Function

User Management

Support password protection

Support user authorization management

SNMP

Supporting SNMP V1/V2C/V3 version

Web Management

Web Management

Support HTTP V1.1

Support HTTPS

CLI management

Console/Telnet command line management

RMON

Support RMON(Remote Monitoring) alarm

Firmware upgrade

Firmware upgrade

Fault Detection

Ping/Tracerout

Dying gasp

Support optical transceiver DDM function

Cable detection

Support copper port cable detection

PoE Management

Support 802.3af/802.3at

Support PD watchdog

Support PoE priority management

Support Max PoE power configuration for each port

Support alarm waterline configuration

Support reserved power configuration

NTP

Network Time Protocol

Syslog/Debug

Syslog/Debug

Syslog send to two servers

Configuration import/export

Support FTP/TFTP remote import/export

Dual partition management

Support dual partition switching

Application Protocol Function

DHCP Snooping

DHCP snooping trust port

Support remote-id/circuit-id configuration

DHCP option-82

DHCP client

Support DHCP client

Telnet server

Support telnet server

Telnet client

Support telnet client

SSH server

Support SSH server

TACACS

Support TACACS(the terminal access controller accesses the control system)

SFlow

Support network traffic analysis

TFTP

Support TFTP Client

 

Mechanical Drawing

 

 

Packing List

 

  • 1pc switch
  • 1pc user manual
  • 1pc console cable

 

Shipping box information(Below information is approximately accurate)

 

Product size: 158*115*96mm

Inner box size: 230*180*142mm

Product weight: 1.4Kg

Packing weight: 1.7Kg

 

Master box size: 475*465*380mm

Packing quantity: 12Pcs

Packing weight: 22Kg